Posts tagged room decor
DIY Minimalist Floating Wood Shelf

For a while now, I’ve been shopping for a minimal raw wood floating shelf, but to no success. Knowing that adding shelving to your walls will enhance your space, I always make it an effort to do so. I have always loved floating wood shelves in particular. So, I decided to take it into my own hands and design one that was not only pretty and the exact aesthetic I was going for, but inexpensive and easy to make.

This post is meant to provide the exact measurements and supplies that you will need. I also filmed a video of me making this exact shelf from start to finish so that you can easily visualize each step and refer back to it if you decide to make one for yourself.

Hello Lovely Living

All supplies besides the drill set (which was purchased at Ikea) where purchased at Home Depot, so this is an easy one-stop project. It is a very affordable project as well at under $15 for all supplies, and you could easily make multiple shelves for under $10 with leftover supplies.

Watch the video below for a quick tutorial on how to make this floating shelf!

SUPPLIES


• 1 - 0.75” depth x 5.5” width x 24” length piece of maple wood board

• 60 sandpaper for wood (comes in pack of 5 sheets)

• 2 - #10x3” phillips wood screws (comes in pack of 2)

• 2 - EZ Ancor drywall anchor that hangs up to 75lbs (comes in pack of 4)

• #12-24 Everbilt machine screw nuts (comes in pack of 10)

• 3/4” diameter x 48” length wooden dowel (cut down to 2 - 7” pieces.

• Drill bit and phillips screwdriver

INSTRUCTIONS


STEP 1

Cut dowels

Home Depot has a saw station that you can use to cut down your wooden dowels. Cut 2 - 7” pieces. With remaining wood, you could easily make 4 more pieces depending on if you are making multiple shelves. Of course, you’d need to adjust your amount of supplies if that is the case.


STEP 2

Sand dowels

Sand down the ends of the wooden dowels until smooth.


STEP 3

Drill dowels

Drill one side of each dowel 2” deep and at a circumference that allows for the head of the phillips screw to be completely inserted. I drilled my holes to a width of 1.25 cm since my screws had a lip that wide.


STEP 4

measure your wall

Measure the width of the wall you are planning to hang your shelf on. Since the piece of wood is 24” in length, you will need to leave an equal amount of space at each end in order to center it on the wall. This amount will depend on your individual space. Once you’ve identified how much space you need for each side, measure 3.25” from each edge of the piece of wood. This is where your wooden dowels will be placed and where you will place your holes in your wall. Use a leveler to make sure that everything is even before drilling your holes. I just downloaded a leveler in the app store and used my phone to do this.


STEP 5

Install drywall anchors and screws

With your drill bit, drill your holes into the wall and then screw the drywall anchors in place with a phillips screwdriver. Take your phillips screws and run a screw nut through each before you install them. Screw in until secured and tight (about 1”). Leave a 2” allowance to insert the wooden dowels into.

STEP 6

Insert wooden dowels and hang

Insert the wooden dowels into the screw and nut until secure. Hang shelf and then style with finishing touches. Make sure to keep shelf flush to wall so that all the weight is held up against the screws.

public.jpeg

Wasn’t that an easy project! If you try this project, make sure to tag me @hellolovelyliving on Instagram so I can see!

I also have another hanging wood shelf project you may be interested in too. You can see that here!

What home decor projects have you been wanting to do lately?




DIY Urban Outfitters Hanging Wood Shelves | Daiso Hack!

Today, I’ll be showing you how to make these oh-so-cute hanging wood shelves. The idea came to me after coming across wooden cutting boards at Daiso. If you’re not familiar with Daiso, it’s a popular discount store that sells Japanese products for $1.50 and up, so you can find many things for the home there for very cheap. Daiso is everywhere here in California, so I am living for it!

 
 

I purchased the wood cutting boards not knowing for sure what I was going to make with them until I remembered this Urban Outfitters hanging shelf that I had bookmarked a while back. I realized that the wood pieces from Daiso would be perfect for creating a product dupe for much less. In all actuality, these DIY hanging wood shelves probably cost less than $5 each to make, and being that I already had everything I needed to make these except for the wood, it only cost me $3 for two - what a steal!

 
hellolovelyliving
 

I love how they turned out (I made two of them), so I hope you try making them too. This is one of the easiest wood shelving ideas, especially if you live in one of these apartments for rent in McKinney and you want floating wood shelves, but you are looking for more of a quick and easy way to do it. I absolutely love the raw and natural wood look of these too, so these came out perfect and fit my aesthetic and decor so well. They also have that minimalist + bohemian + Tumblr vibe going on, and we are all about that life over here!

Watch the video below to learn how to make it, and if you are needing a to refer back to the instructions, I have written them out below. I have also listed all of the supplies needed for this project. Enjoy!

 


 

Supplies


2" Natural wood rings

Off-white yarn

• Daiso wood cutting board 30 x 19 x 0.9 cm (11.81 x7.48 x 0.35")

• IKEA Drill

• Scissors

• Pen

Wall hooks

 

instructions


STEP 1

mark holes + drill

At each corner, mark 1” in from each side, then drill a total of 4 holes.


STEP 2

cut yarn + string through holes

Cut 2 - 4’ pieces of yarn and then string each piece along the landscape orientation of the wood. Evenly distribute yarn so that when it is held upright, you have even lengths of yarn at both sides.


STEP 3

loop strings through wood ring + adjust placement

Gather strings through the wood ring and then place the shelf up against a wall to test out the placement of the strings. To ensure that the wood piece hangs level to the wall, adjust the string’s tension by allowing the wood piece to even out so that it is laying flat. Your strings will be angled slightly, so just hold them tightly against the wood ring because a knot will be placed around them at this length.


STEP 4

cut a 12” piece of yarn + make a gathering knot

Watch my YouTube video above for how to do this part because this is the tricky part!


STEP 5

hang + enjoy

Hang your shelf anywhere on your walls with a picture hanger hook which provides a bit of an angle for the wood ring to rest in. These are the exact ones I used to hang mine.

 
hellolovelyliving.com | DIY Urban Outfitters Hanging Wood Shelves | Daiso Hack!
 

Wasn’t that so simple?! I thought it was a very easy project to do. Two shelves could very well be done in less than 15 minutes, so it is also a very quick project. If you decide to make these, let me know how yours turn out. I’d also love to see how you style these.

 

what home decor items have you been eyeing lately?


This post contains affiliate links. Please see my privacy policy for a complete disclosure.