Posts tagged energy rating
Practical Tips To Save Money On Your Gas Bill

Are you tired of seeing your hard-earned dollars go up in smoke every month when you pay your gas bill? Well, you are not alone. With the ever-rising cost of energy, finding ways to save money on your gas bill has become a priority for many households.

Fortunately, there are practical tips that can help you cut down on your gas expenses without sacrificing comfort or convenience.

In this article, we will explore some effective strategies to help you lower your gas bill and put that extra money back into your pocket. From simple lifestyle changes to affordable home improvements, we will cover a range of actionable steps that can make a significant impact on your monthly gas expenses.

No. 1

Heat your home more selectively

In the United Kingdom, heating and cooling make up the largest portion of gas consumption for the average household, accounting for approximately 40 percent of the total usage. To minimize your energy consumption, it is advisable to prioritize heating the areas you frequently occupy. 

By ensuring proper insulation and closing doors to unoccupied spaces, you can effectively retain heat in the desired areas. Keeping your boiler maintained ensures that it is running efficiently. 

Additionally, to avoid unnecessary heating expenses, remember to turn off the heating system when you're away from home or during sleep hours.

No. 2

Invest in a Programmable Thermostat

Even a slight adjustment of one degree Celsius (°C) lower for cooling or higher for heating can result in an additional 10 percent increase in heating costs. For heating purposes, maintaining a temperature range of 18 to 20 degrees Celsius is typically adequate. To efficiently save on gas costs without the need for constant manual adjustments, it is worth considering the purchase of a programmable thermostat.

No. 3

Minimize your hot water consumption

One effective way to lower your gas costs is to reduce the amount of hot water you use. By opting for shorter showers instead of long baths, you can significantly decrease your water consumption. Aim for showers that last around four to five minutes to save both energy and water. 

Another useful strategy you can consider is to install a low-flow showerhead, which can help further reduce your energy and water expenses. Additionally, it's essential to address any leaky hot water outlets promptly.

No. 4

Invest in an instant water heater

Heating water accounts for a substantial 30 percent of your overall energy consumption at home. However, you can make significant long-term energy savings by adopting an instantaneous hot water heating system. These systems only heat water when it is needed, eliminating the need to keep it hot throughout the day.

Although they may have a higher upfront cost, the energy savings they provide over time can offset this initial investment. If you're interested in ensuring your boiler operates efficiently, you can explore boiler cover options here.

Another effective approach is to ensure proper insulation for your hot water pipes and storage tank. By insulating these components, you can substantially reduce the amount of energy required to keep the water hot. Without proper insulation, up to 30 percent of the energy used for water heating can be lost. 

No. 5

Enhance energy efficiency through proper home insulation

Proper home insulation is a key strategy for reducing gas consumption and achieving significant energy bill savings. A well-insulated home provides year-round benefits, keeping it warmer in winter and cooler in summer.

Without proper insulation, a poorly insulated home can lose up to 50% of heat through the ceiling during winter and gain up to 60% of heat through the walls and ceiling during summer. 

By insulating your home, particularly the roof, you can reduce your reliance on heating during cold weather and trap warm air inside while keeping cold air out. This not only creates a more comfortable living environment but also lowers energy usage and gas costs.

No. 6

Upgrade to an energy-efficient washing machine and dishwasher

Appliance manufacturers are continually enhancing the energy efficiency of their products. If your washing machine or dishwasher is more than 5 years old, it may be consuming excessive energy. Consider replacing these appliances to minimize energy waste.

When choosing replacements, prioritize the appliance that you use most frequently. Opt for energy-efficient models with features like eco-wash, which provides control over water temperature and water level, particularly when hot water is necessary. Additionally, pay attention to the energy rating of the appliance.

Takeaways

In conclusion, saving money on our gas bills requires a mindful approach to our energy consumption. By incorporating practical tips such as effective insulation, regular appliance maintenance, smart heating controls, energy-saving habits, and exploring alternative energy sources, we can successfully reduce our gas bill while creating a greener home environment. Let us embrace these practical strategies and make a positive impact on both our finances and the planet.




Reduce Electricity Bills At Home: Energy Saving Tips
Hello Lovely Living

@hellolovelyliving agrees that switching to smart bulbs is a quick way to reduce energy consumption in the home

It is an unavoidable fact that we all depend on a constant supply of energy to live successfully in this world. No one is exempt from their reliance on energy, which fuels our most basic needs. From our dependence on energy to power our homes and offices to our most basic needs of growing the food that we eat, our reliance on energy consumes every facet of life. Learning how to apply new behaviors to how we interact with our world and our energy consumption is at the forefront of effective environmental change.

With an ongoing push toward reducing our reliance upon environmentally degrading fossil fuels, companies are rising to meet the needs of their consumers. From eco-friendly appliances to insulating door and window treatments, smart power strips, and other energy-saving measures enable us to save on electricity costs while enabling us to do our part within our reach—our homes.

In this article, we will discuss a few cost-saving tips to consider when cutting down on your energy usage at home.

Keep an eye peeled on energy-draining devices and turn them off if not in use

Naturally, if your home appliances are switched on unnecessarily, there will be higher electricity consumption. To combat this, turning off air conditioners, fans, lights, and other devices and appliances when not in use or before leaving a room is advisable to save power and conserve energy.

To many, the energy they are consuming on their own may seem limited, but it all adds up to the overall household energy usage at a daily, monthly, and annual rate. Learning to apply simple habits that go a long way can make huge contributions to your energy-saving goals. Maintaining healthy energy usage behaviors can save you money in areas that you would have otherwise overlooked. Remember to practice these daily habits regularly until it becomes second nature to you.

Use curtains and window blinds to reduce energy usage

Keep the temperature in your home at a comfortable and temperate level so as not to overcompensate for cooling or heating the home when it is not necessary to do so. Thermal curtains and insulating blinds make it easier for you to keep the temperature in your home consistent and manageable throughout the seasons. Simply install them in just a few steps, and you are good to go. The best part is that these work well in both summer and winter climates. 

For colder seasons, these window treatments reduce air filtration and keep cold air from entering and warm heat from escaping the room. In the summer, thermal curtains block out as much as 33% of solar radiation through thermally reflective backings. This solution is budget and eco-friendly, and with little to no maintenance, you will also effectively reduce your dependence on traditional heating (furnace) and cooling (air conditioner) costs as well.

Get your home insulation done properly

If you have ever taken a cold shower due to a downed water heater, you were unwittingly confronted with the cold hard truth that hot water is a necessity that many of us will not choose to ever live without. Being as it may, a water heater is one of those appliances that stay on 24-7, so off-setting the cost is something that we could all benefit from.

Typically, water heaters lose heat through their pipes, so insulating your hot water pipes will go a long way in improving efficiency and raising the hot water temperature by 2°F–4°F hotter than uninsulated pipes. This will allow you to reduce your hot water temperature setting and allows the water to be heated at a faster rate, thereby reducing unwanted water loss caused by over-running the water when it is warming up.

In addition, insulating your electric hot water tank with insulating blankets could reduce standby heat losses by 25%–45% and save you about 7%–16% in water heating costs—and should pay for itself in about a year. You can find pre-cut jackets or blankets available for around $20. The result—your water will retain heat more effectively, consequently saving energy.

If you live in a cold climate, you must upgrade the insulation by sealing cracks and windows that are continuously circulating air. This will ensure that cold air does not get in and warm air stays inside, reducing the output of your heater. The same goes in summer when you are trying to keep the cool air indoors while keeping the hot air outdoors.

 

Takeaways

Every small change counts toward reducing energy consumption and, most importantly, your electricity bills. The tips mentioned in this article are simple, yet so effective. All it takes is some forethought and implementation, and you will be enjoying the compounded cost savings throughout your home.

To take it a bit further, try these other energy and cost-saving practices:

  • Use smart bulbs instead of LED bulbs

  • Dim the lights to lessen wattage and output

  • Turn off stove burners promptly

  • Opt for smart plugs and schedule when they will turn on and off

  • Have appliances that are not regularly in use on standby




5 Eco-Friendly Appliances For A Sustainable Home

For optimal living and a sustainable existence for all people on earth, protecting the environment is essential. These practices first start in the home, so we can not simply rely on regulators or the government to push us toward implementing them.

By introducing energy-efficient and eco-friendly appliances into your home, you can do your part to contribute in a positive way and create change that is within your reach. These habits also reduce electricity bills and in some appliances, 10 to 20% of energy consumption.

With all of the economic, environmental, and societal changes happening worldwide, we are confronted daily with the responsibility to do what is required of us individually. We spend most of our time at home, so upgrading to eco-friendly appliances is a great place to start.

Undoubtedly, with so many options available, buying appliances for a sustainable home becomes overwhelming. So, today, we compiled a list to help you identify five appliances to focus on first in this process.

01

Refrigerator

Standard refrigerators with low and no energy star ratings are inefficient. In addition, when considering reducing our impact on the environment, inefficient appliances are simply no longer acceptable.

Hydrofluorocarbons (HFCs) and Chlorofluorocarbons (CFCs) in the refrigerant coolant fluid are what deplete the ozone layer. Therefore, it is advisable to choose advanced refrigerators that do not use toxic coolants.

Fortunately, modern and advanced refrigerators are built with efficient cooling systems and compressors that evenly distribute cold air. There is a considerable amount of options available for you to choose from. Take your time to explore the different technologies that are built in before you commit to purchasing a new refrigerator.

02

Air Conditioner

Air conditioners are among the highest energy-consuming appliances. In homes and offices, these appliances are often kept running throughout the day. This leads to high energy bills, particularly in the warmer months when the need for cooling the home is unquestionable.

Let's say a home has AC in all rooms and the residents are sitting in another room; the wifi window air conditioner can sense if there are no people in the room and will turn off. Furthermore, such small and advanced technologies allow for optimal power usage so that energy is not wasted and ensure functionality only when cooling is needed.

The best part is that you can easily manage the AC without leaving your couch. Advanced models allow you to adjust settings on your phone. Most air conditioners also have a pre-assembled kit that keeps their installation easy and manageable. 

03

Dishwasher

Dishwashers are another appliance that significantly contributes to high energy consumption and therefore must be addressed when looking for environmentally friendly appliances.

Generally, dishwashers have a huge impact on the environment because they require large amounts of electricity and water to operate. The energy consumption includes heating the water, loading the water, and circulating the detergents for dish cleaning, rinsing, and drying. 

Advanced dishwashers uphold stringent water-saving and energy-efficient standards. Energy-efficient dishwashers are designed with new technologies such as soil sensors, better water filtration, and high-efficiency jets. This leads to less water and energy consumption, which results in annual cost savings.

04

Washing Machine

Like dishwashers, washing machines can also become eco-friendly appliances. They are both similar in that they both require high water and energy consumption. To save a considerable amount of money on electricity bills and reduce your environmental impact, switch out this appliance as well for an energy and water-efficient model.

Energy-efficient washer machines have more options than standard models, increasing efficiency and offering alternatives that substantially save energy and water with each load. For example, many models now have a steam option, which substantially reduces the amount of water to clean soils as well as the energy needed to heat water.

05

Convection Oven

Convection ovens are highly effective and consume only 20 percent of energy than conventional ovens. With a conventional oven, the heat rises to the top, whereas with a convection oven, the heat is circulated with a fan that allows food to be evenly cooked. This is similar to an air fryer, which cuts down on cooking time as well and heats quicker and more efficiently. We like the Cosori Pro Smart air fryer because not only is it compact, but it has a modern design that looks nice in the kitchen.

Takeaways

Integrating eco-friendly home appliances into the home is a proactive step toward reducing energy consumption and water usage. Above all else is the fact that you will also be reducing your environmental impact and the costs associated with running appliances daily. If we all do our part, we can impact the environment around us in ways that are more monumental than we think. It all starts with adjusting our energy consumption behaviors and building responsible habits. We are all responsible for caring for the world we live in and taking active measures to create change.

Are you already playing your part? What practices are you following?

We would love to hear your thoughts in the comments below.